What's the steel plate bending machine include

What's the steel plate bending machine include?  

The structure of the machine is hydraulic three-roller symmetrical type. The upper roller is vertically lifted and moved in the central symmetrical position of the two lower rollers. The hydraulic oil in the hydraulic cylinder acts on the piston to obtain the hydraulic transmission. The two lower rollers rotate and accelerate. The output gear of the machine meshes with the lower roller gear to provide torque for the rolled sheet. The machine has high transmission efficiency, strong economy and applicability, and high cost performance. The disadvantage of this machine is that the end of the plate needs to be pre-bent by other equipment.

The machine is hydraulic three-roll bending machine for rolling a steel plate into a cylindrical shape at a normal temperature.
The upper roller moves vertically and the rotation is passive.
When spheronizing, the two lower rollers are driven by a motor and a speed reducer.
Since the elevation of the lower roll is constant, it is easy to feed and operate.
With PLC control, the roller displacement is digitally displayed.
Provide detailed electrical schematic diagrams. The electrical wiring shall be strictly in accordance with the drawings. The numbers at both ends of each connection shall be clear and complete. The line terminal shall be marked with the same line number as the connection number, and shall be in the electrical wiring diagram. And the schematic diagram is marked accordingly;
The electrical components used in the equipment are all made of high-quality products with famous brands. Electrical protection devices (such as current relays, air switches, etc.) must be strictly tested before installation and ensure reliable operation.
The hydraulic components used in the equipment are made by Yuci Oil Research.
The equipment runs smoothly, has flexible control, no jamming, oil leakage and abnormal noise.
The surface of the paint must be flat and bright, the thickness of the paint is uniform, and there are no defects such as leakage and so on.
The overturning frame is hydraulically tipped over and has a faster speed.
The vertical displacement of the upper roller is hydraulically driven and the speed is faster.
The equipment has high reliability and low failure rate.