Equipment Overview

1. The equipment can weld the parallel seams at one time, and have Very good effect for the welding of beams cross-section. It is the best equipment for car stringer welding at this stage.
2. the equipment adopts  the automatic square technology which independent research and development by our company, can automatically track the welding gap, overcome the weld arc breaking phenomenon of cross-section welding, improve work efficiency, save the welding material.
3. This equipment adopts single-arc monofilament high-current submerged arc welding process, high welding efficiency, beautiful welding forming effect, deep penetration greatly increased the strength of the workpiece.
4. This equipment adopts the advanced microelectronics technology in current domestic and foreign , with convenient control, easy operation and so on.

Technical Parameters

1.Equipment size

Gauge:2795mm

Rail length:18m(can designed as custom’s requirement)

Effective Welding Length:16m(can designed as custom’s requirement)

Effective Welding Width:200-700mm

2. Welding workpiece size

a)Web plate width:200-600mm

b)Wing plate height:50-300mm

c)Wing plate thickness:14-25mm

d)Application:Carbon steel, low alloy steel

3.Welding style: Flat angle welding

4.Drive: Double Side Drive

5.Equipment performance parameters:

 a) Return speed: 4000mm / min

b) Welding speed: 200-1200mm / min

c) torch up and down travel: 300mm

d) torch left and right travel: 700mm

e) wire diameter: 3.2-4mm

f) Wire plate capacity: 25kg

g) flux bucket capacity: 100kg / Taiwan

h) weld quality standards: in line with GB10854-89 

6. Submerged arc power performance:

a) Total power capacity: 100KVA × 2

b) Input voltage /: 380V ± 5%

c) Power frequency: 50 / 60HZ

d) Duty cycle: 80%

e) welding current: 200-1000A

f) Welding voltage: 27-75V

Equipment working environment

1. Voltage: AV380 ± 5%

2. Frequency: 50-60HZ

3. Relative humidity: 85%

4. Elevation: ≤1000M

5. Temperature: -10 ℃ - 40 ℃